ProjectE: EMC, Philosophers Stone and трансмутация

Find Philosopher in your game's recipes and look at the entire cost before making. The stone is involved in alchemic recipes and can change some of the world's blocks. To begin with, it's more useful to use it in a controlled craft than to try all modes near a ready-made base.

Select ProjectE keys separately: Mode, charge, and extra actions depend on the object. If a stone suddenly changes more blocks, stop the experiment and look at its current settings. First check with cheap replacement blocks. Do not confuse the presence of a stone with an endless source of any material: conversions still follow the EMC rules.

Make Transmutation Table and prepare a few low-cost materials with the specified EMC. First, study one item. Then add a small amount of value and try to take the result back. Open another copy of the table by the same player: study and balance refer to the character and not just to a particular block.

The interface contains areas of study, search, display available results, and burn objects into the EMC. Do not use the spending area as a common warehouse. First, look at the slot clue, then put a sample in it. The transfer of an entire tool with a combination of keys without checking is able to spend the things you were going to save.

An object without EMC does not become available simply because a similar version has already been studied. A filled container, enchanted things and ordinary material may have different rules. Start with standard units without additional data. The interface device is described in Transmutation Table.

1. Record the displayed EMC of two common items in your world.
2. Study both and bring in a small batch of the cheaper one.
3. Check whether the total balance is sufficient for one copy of the more expensive one.
4. Take one result and compare the balance before and after.
5. Make sure you understand consumption, then move on to higher value materials.

Use the values from your profile to calculate: the number of inputs x EMC of one entry should cover the price of the result. The remaining value is not an additional free object. If the desired result is not available, check the study, search and balance separately.

Energy Condenser operates as a production unit. Place one target object in the sample slot. In the working tool, supply low-cost material with EMC. When sufficient value is accumulated, the device will produce a target result. First, perform one manual operation.

Especially carefully separate the sample from the raw material that is consumed. The destination item sets the product, and the other inputs can become EMC. For the first line, use a single-material chest and a tube filter. Direct connection to the general warehouse without a filter can process more than planned.

MK2 accelerates the processing and changes the organization of the input and result; this is not a mandatory startup block. First set up the normal Condenser and understand its route. The behaviour of both devices is described in Energy Condenser.

Energy Collector receives the EMC from light and can use it for intended changes, charging, and transmissions to neighbouring devices. The better the lighting conditions, the closer it is to this level. Do not consider the normal FE cable as a ProjectE wire: this is another value system.

For the first check, place the manifold in suitable conditions next to the right recipient. Monitor the accumulation and consumption separately. If the manifold produces EMC and the final item does not appear, check the recipient, its sample and price, and not just the lighting. If the inner receptacle is filled, the production may look like a stopover due to lack of further task.

Improve the device after measuring your line. The levels and server configuration limits may differ; constant numerical promises from an old guide are not needed here. Basic modes are listed in Energy Collectors.

Select one renewable entry and one useful exit. Bring raw material to the Condenser via a restricted buffer, set up a separate output and check the line after restarting the world. Do not build a closed route that returns the finished product to the entrance and again spends it.

Before changing the EMC, the operator needs to save configuration and peace. ProjectE calculates value by reference to known recipes; external processing and copyrights require verification. Old articles can call confiscations from previous versions. Use installed branch files and clues from accessible commands, and check with the computation principle. description of EMC calculation.

Retrieved November 1, 2026 from the author's wiki and sources of the mc1.20.x branch. Numbers from old wiki sections have not been carried over as a universal balance. Other ways to get materials - Mystical Agriculture and Productive Bees; organization of a large warehouse - Storage Drawers.