Draconic Evolution: Fusion Crafting and развитие экипировки

Set up the relationships in the selected file and open JEI. Check the recipes for Draconium, the first components, Fuse Crafting Core and an accessible injector. In large fashion packs these recipes often become part of their own progress, so a ready list of materials from another passage may not fit.

Provide a permanent power generation and buffer. For each expensive recipe, look not only at the total cost but also at the delivery rate. A large reserve storage device and a weak cable give a long charge. A fast cable with an empty storage device will not complete the operation either.

Place the craft site separately from the main warehouse. Leave access to each side of the injectors and to a further extension. Do not build a dense decorative box around the core until the first recipe is checked.

The number of injectors is selected by the number of ingredients of the recipe. Their level must be no lower than required. "There is a free slot" and "injector" is different. The hybrid unit only works when each participating component meets the requirements of the recipe.

Turn the injectors to the core and leave the free direction between them. The checked code takes into account orientation and obstacles; the adjacent decor or other injector can interfere with recognition. The permissible distances are related to configuration, so do not consider one size of a site as universal for any assembly.

1. Select one simple, accessible Fusion recipe in JEI. Write down the central ingredient, external ingredients, minimum tier and cost.
2. Place the core and the required number of suitable injectors with access for maintenance.
3. Apply power to the injectors. Check that the cables and drive output allow it to pass through.
4. Place the central item in the Core, the remaining components in the participating injectors.
5. Read the status in the interface. Start the operation after the ready state.
6. Wait for charging to complete; Do not pull out ingredients while working.
7. Take the result and only then activate the automatic feed.

During the first check, turn off the tubes from the injectors. Automation that removes the ingredient in advance or delivers an extra batch makes it difficult to diagnose. First, establish that the design and recipe work on their own.

Change one condition. If you move all the injectors, change the cable and add ingredients at the same time, it's impossible to understand the original error. For a complex recipe, it's useful to compare it with the simple one that has already been tested: does the same site work at all?

Modern tools and equipment are being developed through modules. Plan not only the expensive object itself but also a useful set for it: energy accumulation, necessary functional functions and protection. A free grid without the necessary modules does not provide all the opportunities shown in someone else ' s character.

Compare the compatibility, size and level of the module with a specific object. To protect you can distinguish between shield capacity, recovery, and energy costs. A large reserve of the board without food and repair does not mean permanent invulnerability. After changing configuration, test it on a familiar moderate load.

Keep a back-up way of charging and returning. If the equipment performs vital functions, its discharge away from the base becomes a problem for the entire expedition. Do not start a later test immediately after the armor body has been manufactured.

To order Fusion recipes via AE2 First, set up one repeated recipe with accurate delivery and return of the result. The next order should not be placed until the previous one is released. The intermediate buffer and supply lock help to separate cycles.

Energy Core is a storage device, and Dragonic Reactor is a generator with its own control requirements. Do not consider one as a substitute for the other, and do not start a reactor to correct the error of "No Valid Recipe". This article teaches Fuse Crafting and Equipment; for a reactor, it is your version that needs a separate verified control scheme.

For alternative FE production, one can start with Powah. First measure the total base load and only then choose the generation scale.

Retrieved November 1, 2026: Draconic Evolution page, Draconic Inc repository, Fusion Crafting Core checks and messages and modules of branch 1.21.